HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 61 Error Codes — Part Code 7005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WWait a few seconds, and
retry the operation.
Processing in progress.
Please wait for a while, and
then retry the operation.
65027005
0iWait a few seconds, and
retry the operation.
The target volume status is
being changed to SMPL.
65037005
0EIf this problem persists, call
HP technical support.
This error code is not
registered.
73107005
4ERetry the operation. If you get
the same message again,
A time-out error occurred.80007005
reboot the computer. If
necessary, Call HP technical
support.
4ERetry the operation. If you get
the same message again,
A time-out error occurred.80017005
reboot the computer. If
necessary, Call HP technical
support.
4ERetry the operation. If you get
the same message again,
A time-out error occurred.81007005
reboot the computer. If
necessary, Call HP technical
support.
0iAdd shared memory or
confirm whether the
Sufficient amount of shared
memory is not installed or the
85007005
necessary program product
key is installed.
program product is not
installed.
5WWait a few seconds, and
retry the operation.
The command has been
rejected, because the
85017005
previous command is being
processed.
0iDelete the XP Continuous
Access pair.
You cannot reserve the
volume, because a XP
85027005
Continuous Access pair exists
in the same subsystem frame.
0iDelete the XP Continuous
Access pair.
You cannot create the new
pair, because a XP
85037005
Continuous Access pair exists
in the same subsystem frame.
0iConfirm the composition, the
status, or the volume status of
The command was rejected.
Check the composition, the
85047005
the pair. (See the HPstatus, or the volume status of
the pair. XP24000/XP20000 Business
Copy Software User's Guide
for the relationship between
the composition of the pair,
status of the pair, or the
volume status of the pair and
those operations.)
5ESee the section describing
creating pairs and the pair
The command has been
rejected, because the
85057005
status in the HPoperation will not function
with the current pair status. XP24000/XP20000 Business
Copy Software User's Guide
for the relationship between
Remote Web Console Error Codes 333