HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 58 Error Codes Part Code 6610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
Performance Monitor Export
Tool to export the monitoring
data file.
5iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The monitoring data saved at
present will be deleted when
the monitoring switch is set to
Enable the next time.
590316610
The monitoring data currently
saved will be deleted when
you change the setting of the
monitoring switch. If
necessary, use the Export
Tool to save the monitoring
data.
0WPurchase a license for
Universal Replicator for
You cannot add journal
volumes because Universal
590406610
Mainframe, and then install
it.
Replicator for Mainframe is
not installed.
0WTo delete the journal volume,
click [Yes]. Otherwise, click
[No].
Warning:
A mainframe volume is
included in the journal
volumes to be deleted.
590416610
It is recommended that you
record the LDKC number, the
Note the following points if
you have made volume pairs
CU number and the LDEV
number of the mainframe
volume.
by using this journal group
before.
The mainframe volume will
be blocked.
The mainframe volume
needs to be formatted
when you use the volume
as a non-journal volume.
The LDKC number, the CU
number and the LDEV
number of the mainframe
volumes are
recommended to be
recorded.
Do you want to continue
the operation?
0WAll journal groups are used
by Universal Replicator for
There are no valid journal
groups.
590426610
Mainframe or XP Continuous
Access Journal. If possible,
delete journal groups of
Universal Replicator for
Mainframe or XP Continuous
Access Journal, and then start
the XP Continuous Access
Journal window or the
Universal Replicator for
Mainframe window.
0WReduce the number of journal
volumes to be registered, or
The number of journal
volumes in some journal
590436610
increase the number ofgroups exceeds the
324 Remote Web Console for Storage System Messages and Error Codes