HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 58 Error Codes — Part Code 6610 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCheck the number of mirrors
in the journal group. Then
Too many mirrors in the
journal group.
550376610
delete unused mirrors, or
register them in another
journal group.
0iCheck the number of mirrors
in the journal group, and
then delete unused mirrors.
Too many mirrors in the
subsystem.
550386610
0iCheck the range setting. If
you specify Group, select
You are specifying Group for
the range and trying to
550396610
only one data volume pair in
the mirror.
manipulate the same mirror.
Select only one data volume
pair in the mirror when you
specify Group for the range.
0WCheck the specified controller
ID.
The specified controller ID
cannot be used.
552026610
0WThe value of Threshold of start
Async JNL must equal or be
Some of the specified values
are incorrect. Two times the
552076610
less than the Threshold of
start Sync JNL value.
value of M-JNL Cache plus
the value of R-JNL Cache must
be equal to or less than 100.
Or, the value of Threshold of
start Async JNL must be equal
to or less than the value of
Threshold of start Sync JNL.
0WSpecify the correct journal
group number.
The specified journal group
number is incorrect. Specify
552086610
the correct journal group
number.
0WSpecify normal deletion, or
specify Group as the range.
You want to forcibly delete
pairs, but there are some
552296610
pairs where Group is not
specified as the range.
Specify Group as the range
when you want to forcibly
delete pairs.
0WTo delete pairs, click [Yes].
Otherwise, click [No].
[Warning]
There are some pairs where
Group is not specified as the
556446610
range in the pairs specified
to be deleted forcibly.
Other pairs in the same
group may suspend due to a
failure by this operation.
Are you sure you want to
delete pairs?
0WRegister a journal group.There is no journal group that
can be used as a master
journal group.
565046610
0iRegister secondary storage
systems, and then retry the
operation.
There are no secondary
subsystems available.
Register secondary
565056610
322 Remote Web Console for Storage System Messages and Error Codes