HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
the status of the path to the
external volume.
6EThe host is mounted or the
device is reserved. Unmount
Processing is disabled
because the host is mounted
or the device is reserved.
20820003
the host and cancel
reservation of the device. If
the host is an AIX host,
unmount the host, and
execute the varyoffvg
command.
2ECheck the DKC status and the
current status of the
The subsystem status is
invalid. Call HP technical
support.
20830003
configuration setting. If
necessary, re-execute the
setting operation.
2ECheck the DKC status and the
current status of the
The subsystem status is
invalid. Call HP technical
support.
20840003
configuration setting. If
necessary, re-execute the
setting operation.
6WWait a few seconds, and
then retry.
Copying is in progress for XP
Continuous Access, Business
20850003
Copy, ShadowImage for
Mainframe, Auto LUN,
Compatible FlashCopy(R) or
Flex Copy XP pairs. Please
wait for a while, and then
retry the operation.
6WReset the configuration
definition of XP Continuous
The configuration of XP
Continuous Access, Business
20860003
Access, XP Business Copy,Copy, ShadowImage for
ShadowImage forMainframe, Auto LUN,
Mainframe, XP Auto LUN,Compatible FlashCopy(R), or
FlashCopy Mirroring, or XPXP Snapshot has been
Snapshot, and then retry the
operation.
defined. Reset the
configuration definition, and
then retry the operation.
6WTake the storage system
offline from the host.
The system is online to the
mainframe host. Take the
20870003
subsystem offline from the
host.
6WAdd an alternative path.The XP Continuous Access
pair is suspended. Add an
alternative path.
20880003
6WBe sure there is an alternative
path from the MCU.
The corresponding CHA
might contain the last path
20890003
between the MCU and RCU
of XP Continuous Access.
Make sure that there is an
alternative path from the
MCU.
6WEither reset the settings or
stop the I/Os, and then retry
the operation.
The settings of Business
Copy, ShadowImage for
Mainframe, Compatible
20900003
FlashCopy(R) or Flex Copy
32 Remote Web Console for Storage System Messages and Error Codes