HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 56 Error Codes — Part Code 6510 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WTo stop the operation, click
[OK]. To continue the
operation, click [Cancel].
Are you sure you want to
cancel the export?
690166510
0WCheck the number of
registered journal groups.
No more journal groups can
be registered, because the
690176510
number of registered journal
groups has reached the
maximum.
0WCheck the LDKC number for
the specified data volume,
There are two or more LDKC
numbers for the specified
690186510
and specify only one LDKC
number.
data volume. In this
operation, specify only one
LDKC number.
0WReduce the number of data
volumes and retry the
The number of data volumes
exceeds the maximum.
690196510
operation. When the number
of volume pairs has already
reaches the maximum value,
you cannot create volume
pairs any further
0iTo continue the operation,
click [OK].
Do you want to release the
remote command device from
the mirror?
690846510
Otherwise, click [Cancel].
Table 57 Error Codes — Part Code 6605
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3ESelect another window. To
set this function, contact the
storage administrator.
This function cannot be used
by the storage partition
administrator.
565246605
Table 58 Error Codes — Part Code 6610
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WSet the things required to be
registered, and then retry the
operation.
No data is set for the SVP
registration.
50306610
0WCheck the contents, and retry.The Operation value is
invalid. Specify the correct
value.
51376610
0WCheck the contents, and retry.The value specified for
Gathering Interval is invalid.
51386610
Specify a valid value within
the range of 1 to 15.
0WSpecify the correct CU
number.
The specified CU number is
incorrect. Specify the correct
CU number.
51406610
0WSpecify the correct device
number.
The specified LDEV number
is incorrect. Specify the
correct LDEV number.
51416610
318 Remote Web Console for Storage System Messages and Error Codes