HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
20130003
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
20140003
persists, call HP technical
support.
6EA communication error
occurs. If the error occurs
An error occurred while
connecting to the subsystem.
20150003
after retrying, call HP
technical support.
Wait for a while, and then
retry the operation.
3EWait a few seconds, and
then retry the operation.
A service engineer is
accessing the subsystem in
20160003
Modify mode. Wait for a
while, and then retry the
operation.
2ERe-execute the request for
starting exclusive lock.
Network error detected;
exclusive lock was released.
20170003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
20220003
persists, call HP technical
support.
3ERetry later.Communication busy. Retry
later.
20320003
3EWait a few seconds, and
then click [Refresh] on the File
The SVP is not ready yet, or
an internal processing is
20330003
menu. When an error occursbeing executed. Wait for a
during login, wait for a while
and login again.
while, and then click [Refresh]
on the File menu. When an
error occurs during login,
wait for a while and login
again.
6WWait a few seconds, and
then retry the operation.
The current Cache Residency
setting cannot be changed
20450003
because the prestaging
operation is in progress.
Please wait for a while, and
then retry the operation.
6EWait a few seconds, and
click [Refresh], and then
Prestaging not completed.20800003
change the same
configuration again. Or
check the DKC status (if it is
not blocked). If the same
error occurs, call HP technical
support.
6EIf this problem persists, call
HP technical support.
An error occurred during a
VLL operation to add or
20810003
To perform a VLL operation
on an external volume, check
delete customized volumes.
Wait for a while, and then
retry the operation.
Remote Web Console Error Codes 31