HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 55 Error Codes — Part Code 6507
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5ECheck the settings, and retry
the operation.
Two or more commands
which were not able to be
processed were demanded.
50366507
3EIf the problem persists despite
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
60126507
2EIf the problem persists despite
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
60366507
2EIf the error occurs after
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
70706507
2EIf the error occurs after
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
70716507
Table 56 Error Codes — Part Code 6510
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WSet the things required to be
registered, and then retry the
operation.
No data is set for the SVP
registration.
50306510
0WCheck the contents, and retry.The Operation value is
invalid. Specify the correct
value.
51376510
0WCheck the contents, and retry.The value specified for
Gathering Interval is invalid.
51386510
Specify a valid value within
the range of 1 to 15.
0WSpecify the correct CU
number.
The specified CU number is
incorrect. Specify the correct
CU number.
51406510
0WSpecify the correct device
number.
The specified LDEV number
is incorrect. Specify the
correct LDEV number.
51416510
0WSpecify the correct group
number.
The specified GID is
incorrect. Specify the correct
GID.
51426510
0WSpecify the correct LUN.The specified LUN is
incorrect. Specify the correct
LUN.
51436510
0WCheck the values, and then
specify correct values.
Some of the entered values
are incorrect. Check the
51446510
values and then specify
correct values.
2ECall HP technical support.An error occurred in client
logic.
73016510
308 Remote Web Console for Storage System Messages and Error Codes