HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
or XP External Storage
Access Manager.
External Storage Access
Manager cooperates.
Delete the XP Continuous
Access or XP External
• The volume was used by
XP Continuous Access or
XP External Storage
Storage Access Manager
pair volume or suspend it.
Access Manager, but the
pair status was not PSUS
or PSUE.
4iCheck the status of the
specified M-VOL from the
host or the SVP.
The M-VOL cannot be used
because M-VOL is a volume
of FICON(R) Data Migration.
688046505
4iCheck the status of the
specified R-VOL from the host
or the SVP.
The R-VOL cannot be used
because R-VOL is a volume
of FICON(R) Data Migration
or Data Migration.
688056505
0WSpecify a volume that is not
used by FICON(R) Data
Migration.
The specified volume cannot
be used as a journal volume
because it is used by
FICON(R) Data Migration.
688116505
0WCheck each capacity of the
primary data volume and the
A pair could not be created
because the specified
688126505
secondary data volume aftersecondary data volume was
the capacity change ofan XP Thin Provisioning
secondary data volume ends.volume whose capacity was
being changed. Plan a combination of
volumes for pair creating.
0WCheck each capacity of the
primary data volume and the
A pair could not be created
because the specified
688136505
secondary data volume afterprimary data volume was an
the capacity change ofXP Thin Provisioning volume
primary data volume ends.whose capacity was being
changed. Plan a combination of
volumes for pair creating.
0WThe specified volume runs on
the 2DC configuration in
The pair cannot be released
because the specified volume
688156505
which XP Continuous Accessis used as the pair volume of
or XP External Storage
Access Manager cooperates.
XP Continuous Access or XP
External Storage Access
Manager.
Release the pair of XP
Continuous Access or XP
External Storage Access
Manager, and then retry the
operation.
0WRetry the operation after the
completion of discarding
The operation failed, because
the specified secondary data
688426505
zero data on the specified
volume.
volume was a volume of XP
Thin Provisioning whose zero
data was being discarded.
0WRetry the operation after the
completion of discarding
The operation failed, because
the specified primary data
688436505
zero data on the specified
volume.
volume was a volume of XP
Thin Provisioning whose zero
data was being discarded.
302 Remote Web Console for Storage System Messages and Error Codes