HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EWait for the maintenance to
complete, and then retry the
operation.
Maintenance operation is
being executed by the SVP.
Wait for the maintenance to
19000003
complete, and then retry the
operation.
6ESelect another volume.The specified volume cannot
be assigned as a LUSE
19040003
volume or a command
device, and the path of the
volume cannot be set
because it is being used as a
Pool volume.
6ESelect another volume.There are virtual volumes and
non-virtual volumes in the
19050003
volumes specified to compose
a LUSE volume.
6ESelect another volume.The specified volume cannot
be set as a command device
19060003
because it is being used as a
virtual volume.
6ESelect another volume.The specified volume contains
XP Snapshot pairs.
19100003
6ESelect another volume.The specified volume contains
Pool-VOLs.
19110003
6ECorrect the settings, and then
retry the operation.
The specified volume is a
remote command device, and
19120003
therefore the command
device setting or the
command device security
setting cannot be set or
released.
6ECheck the setting.The setting cannot be made
because the specified LDEV
is a remote command device.
19130003
6ECorrect the settings, and then
retry the operation.
The number of V-VOL(s) has
exceeded the maximum
19140003
number of V-VOL(s) that can
be set in a storage system.
6ECorrect the settings, and then
retry the operation.
The specified LDEV number
is invalid. The LDEV number
19150003
of the CU group which is not
set in CHA cannot be
specified.
6ECorrect the settings, and then
retry the operation.
You cannot set the volumes
in the same parity group
across multiple CU groups.
19160003
6ECorrect the settings, and then
retry the operation.
The volume(s) in CLPR cannot
be set across multiple CU
groups.
19170003
6WCheck the blocked LDEV and
format the LDEV.
The newly added LDEV has
not been formatted. Check
19190003
the blocked LDEV and format
the LDEV.
Remote Web Console Error Codes 29