HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
If this problem persists, call
HP technical support.
0WConfirm whether the specified
volume is set by Cache
The specified volume cannot
be used as a journal volume
586416505
Residency Manager or Cachebecause the volume is set by
Residency Manager for
Mainframe.
Cache Residency Manager
or Cache Residency Manager
for Mainframe.
0WCheck the DKCMAIN
microcode version of the
The operation failed because
the XP Continuous Access
586836505
secondary storage systemJournal or the Universal
and call HP technical supportReplicator for Mainframe
to confirm whether the XPfunction of the secondary
Continuous Access Journal orsubsystem does not support
the Delta resync function. the Universal Replicator for
Mainframe function supports
the Delta resync function.
0WCheck the status of the
primary data volume in the
The operation to change the
status to the status ready for
Delta resync failed.
586846505
XP Continuous Access
The specified primary data
volume should meet the
following requirements.
window or the TrueCopy for
Mainframe window.
• The specified volume is a
secondary data volume
for XP Continuous Access
or TrueCopy for
Mainframe.
• The pair status of XP
Continuous Access or
TrueCopy for Mainframe
is PAIR or Duplex.
0WCheck the following for the
specified primary data
volume:
Delta resync operation failed
because the specified
primary data volume was not
a data volume of XP
586856505
• The volume is an M-VOL
of a synchronous pair or
Continuous Access or
TrueCopy for Mainframe, or
an XP External Storage
the pair status of the primary
data volume was invalid.
Access Manager pair,
and the pair status is in
PAIR or Duplex when it is
referenced from the XP
Continuous Access
window, the TrueCopy for
Mainframe window, RAID
Manager, or Business
Continuity Manager.
• The volume is an R-VOL of
a synchronous pair or an
XP External Storage
Access Manager pair,
and the pair status is in
SSWS or Swapping when
it is referenced from RAID
Manager or Business
Continuity Manager.
288 Remote Web Console for Storage System Messages and Error Codes