HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
volume. Specify a mirror ID
other than 0 if you use this
volume to create a pair.
5WSpecify the same mirror ID as
the registered mirror ID, and
then retry the operation.
A different mirror ID has
already been registered in
the specified master journal
584586505
group. Only one mirror ID
can be registered in one
journal group, so specify the
same mirror ID.
5WFrom the FlashCopy
Mirroring V2 window, check
The Add Pair operation or the
Resume Pair operation failed
584596505
the status of the specified
secondary data volume.
because the specified
secondary data volume was
used by FlashCopy Mirroring
V2.
5WConfirm the state of the
specified primary data in the
XP Snapshot window.
The Add Pair (Paircreate)
operation failed because the
specified primary data
584856505
volume was one of the
following:
• the specified volume was
a P-VOL of XP Snapshot
and was in Reverse Copy
status.
• the specified volume was
an S-VOL of XP Snapshot.
0WCheck the state of the
specified primary data
volume.
The Paircreate operation
failed because the specified
primary data volume was a
V-VOL for XP Snapshot.
584866505
5WConfirm the status of the
specified primary data
volume.
The Paircreate operation
failed because the specified
primary data volume was a
Pool-VOL.
584876505
0WA communication error
between the primary and the
Only the pair option of the
primary data volume was
584906505
secondary storage systemsupdated. Failed to update the
occurred, or the microcodepair option of the secondary
data volume. of the secondary storage
system does not support the
change pair option function.
Check the main microcode of
the secondary storage
system, and call HP technical
support to confirm whether
the microcode supports the
change pair option function.
If the microcode supports the
function, call HP technical
support because a
communication error might
have occurred.
5WCheck the DKCMAIN
microcode version of the
The Add Pair (Paircreate)
operation failed because the
585006505
secondary storage systemXP Continuous Access Journal
Remote Web Console Error Codes 281