HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 54 Error Codes Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WCheck the CLPR number of
the journal volume in the
The Add Pair (Paircreate)
operation failed because the
583376505
specified master journalCLPR number of the specified
group, and specify theprimary data volume was
primary data volume that has
the same CLPR number.
different from the CLPR
number of the journal volume
in the specified master
journal group.
0WCheck the CLPR number of
the journal volume in the
The Add Pair (Paircreate)
operation failed because the
583386505
specified restore journalCLPR number of the specified
group, and specify thesecondary data volume was
secondary data volume that
has the same CLPR number.
different from the CLPR
number of the journal volume
in the specified restore
journal group.
0WCheck the specified volume
and specify a non-LUSE
volume.
The specified volume cannot
be used as a journal volume
because the specified volume
is a LUSE volume.
583406505
0WCheck the specified volume
and specify a non-external
volume.
The specified volume cannot
be used as a journal volume
because the specified volume
is an external volume.
583416505
0WCheck the setting of the
volume in the Data Retention
The specified volume cannot
be used as a journal volume
583426505
Utility window or the Volume
Retention Manager window.
because of a Data Retention
Utility setting or a Volume
Retention Manager setting.
0WCheck the setting of the
specified volume in the
Volume Security window.
The specified volume cannot
be used as a journal volume
because of a Volume Security
setting.
583436505
0WCheck the specified
secondary data volume and
specify a non-LUSE volume.
The Add Pair (Paircreate)
operation failed because the
specified secondary data
volume is a LUSE volume.
583446505
0WBe sure that IO suppression
mode of the specified
The Add Pair (Paircreate)
operation failed due to one
of the following reasons:
583456505
secondary data volume is
enabled on the XP External
The IO suppression mode
of the specified secondary
data volume is enabled.
Storage window. If the IO
suppression mode is
disabled, check the
The microcode version of
the secondary subsystem
microcode version of
DKCMAIN of the secondary
does not support external
volumes.
storage system, and call HP
technical support.
0WFrom the Data Retention
Utility window, check the
The Paircreate operation
failed because a Data
583466505
settings of the specified
secondary data volume.
Retention Utility VMA was set
up on the specified
secondary data volume.
0WCheck the setting of the
specified secondary data
The Add Pair (Paircreate)
operation failed because of
583476505
278 Remote Web Console for Storage System Messages and Error Codes