HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
secondary data volume is an
open-system volume.
because of the following
reasons:
• Whether S-VOL Disable is
set to the specified
secondary data volume.
• S-VOL Disable is set by
Data Retention Utility.
• The VMA setting differs
between the primary data • Whether the VMA setting
differs between thevolume and the secondary
data volume. primary data volume and
the secondary data
volume.
• Protection is set by Volume
Retention Manager.
Check whether the Protection
attribute is set on the Volume
Retention Manager window
if the specified secondary
data volume is a mainframe
volume.
0iCheck the status of the
specified secondary data
volume.
A Concurrent Copy operation
is in progress on the specified
secondary data volume.
582726505
0iUse Volume Security to check
the status of the specified
secondary data volume.
Either of the following settings
is set to the specified
secondary data volume by
the Volume Security function.
582736505
• The volume belongs to the
access group or the pool
group.
• The setting does not allow
the volume to be used as
a secondary data volume.
0iCheck the specified restore
journal group.
The specified restore journal
group is not registered.
582756505
0iCheck the status of the
specified secondary data
volume.
The specified secondary data
volumes cannot be paired
with another volume, because
582766505
the secondary data volume is
used as a journal volume.
0iCheck data volumes in the
specified secondary journal
group.
The specified secondary data
volume is not registered in the
specified journal group.
582776505
0iCheck the status of the
specified restore journal
group.
The specified restore journal
group is not registered.
582786505
0iCheck the emulation type of
the specified secondary data
The emulation type of the
specified secondary data
582796505
volume or the restore journal
volume.
volume and the restore
journal volume is incorrect
due to one of the following
reasons:
• The emulation type is not
supported.
• The combination of
emulation types within the
journal group is incorrect.
Remote Web Console Error Codes 273