HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCall HP technical support.The cache or the shared
memory is in an abnormal
state.
580996505
0iCheck the serial number and
the controller ID of this remote
The serial number or the
controller ID of the remote
subsystem is incorrect.
581006505
storage system and already
registered remote storage
systems, and then specify the
correct values.
If the specified values are
correct, check the cable
connection of the remote
storage system. If the problem
persists, call HP technical
support.
0iRefresh the window, and
check the pair status.
The pair status is incorrect.581016505
4EThe pair status may be
different in the primary
An internal error occurred.581026505
storage and the secondary
storage system. Wait for a
while, and then retry the
operation. Contact the
support center when the pair
status of the pair does not
match between the primary
and the secondary storage
system. In the volume
attached to Fujitsu OS, the
pair cannot be created by
specifying System for Timer
Type. Specify Local for Timer
Type, and then retry the
operation.
4iCheck the status of the
specified secondary data
The specified secondary data
volume is a reserve volume
of a mainframe host.
581036505
volume from the mainframe
host.
0WCheck the status of the
specified secondary data
The specified secondary data
volume is already used by
Compatible XRC.
581046505
volume from the mainframe
host.
4iXP Continuous Access Journal
or Universal Replicator for
XP Continuous Access Journal
or Universal Replicator for
581056505
Mainframe must be installedMainframe is not installed in
the remote subsystem. in both the local and remote
storage systems when you
create paths or pairs with XP
Continuous Access Journal or
Universal Replicator for
Mainframe. Install XP
Continuous Access Journal or
Universal Replicator for
Mainframe to the remote
storage system.
Remote Web Console Error Codes 271