HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4ECheck the SSB log, and then
call HP technical support.
An internal error occurred.88936505
4EStop the jobs from the host
and retry the operation.
Jobs exist on the port.88946505
4EStop the jobs from the host
and retry the operation.
Jobs exist on the port on the
remote subsystem.
88956505
4ERefresh the window, and
retry. If nothing changes, call
HP technical support.
Parameter error has occurred.88966505
4EDelete the LUs defined on the
port, and retry the operation.
LUs exist on the port.88976505
4iRetry the operation.Pending data exists on the
port.
88986505
4ECheck the SSB log, and then
call HP technical support.
An internal error occurred.88996505
4ECall HP technical support.An error occurred during the
port change.
89006505
4ECall HP technical support.An error occurred during the
port change.
89016505
4ECall HP technical support.An error occurred during the
port change.
89026505
4ECall HP technical support.Unknown Error Code.89036505
0WCheck the status of the port,
and retry the operation.
Remote Web Console
attempted to change the port
89156505
type. However, this attempt
was rejected because the
same operation was in
progress from a host.
4ECheck whether the primary
storage system supports
The primary subsystem does
not support remote copy via
serial interface.
89226505
remote copy via serial
interface. Install the
microcode that supports
remote copy via serial
interface, or execute remote
copy via fibre interface.
4EDelete the logical paths on
the specified port, and retry
the operation.
Logical paths are defined to
the port on the remote
subsystem.
89246505
4WCheck the port type of the
specified port, and retry the
operation.
Invalid port type.89296505
4EDelete the logical paths on
the specified port, and retry
the operation.
Logical paths are defined to
the port on the remote
subsystem.
89306505
4EDelete the logical paths on
the specified port, and retry
the operation.
Logical paths are defined to
the port on the remote
subsystem.
89316505
264 Remote Web Console for Storage System Messages and Error Codes