HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
• a Business Copy P-VOL in
Swap or Reverse Copy
status
• a ShadowImage for
Mainframe S-VOL in Swap
or Reverse Copy status
4ECheck the SSB log, and then
call HP technical support.
An I/O error occurred on the
secondary data volume.
88226505
4iVolumes reserved by XP Auto
LUN cannot be specified as
The specified primary data
volume is already reserved
by Auto LUN.
88306505
primary data volumes. Check
the status of the specified
primary data volume from the
host or the SVP.
4iVolumes reserved by XP Auto
LUN cannot be specified as
The specified secondary data
volume is already reserved
by Auto LUN.
88316505
secondary data volumes.
Check the status of the
specified secondary data
volume from the host or the
SVP.
4iWait a few minutes and retry
the operation.
Wait a few minutes and then
retry the operation.
88326505
4iWait for a few minutes and
retry the operation.
Wait a few minutes and then
retry the operation.
88336505
4ESee the license key
information and check the
The Add Pair (Paircreate)
operation failed because you
88346505
licensed volume capacity. Totried to create volume pairs
create more pairs, purchasewhich exceeded the licensed
capacity. a license key for using larger
capacity.
0WSee the license key at the
secondary storage system
The Add Pair (Paircreate)
operation failed because you
88356505
and check the licensedtried to create volume pairs
capacity of volumes. Towhich exceeded the licensed
create more pairs, purchasecapacity of the secondary
subsystem. a license key for larger
capacity.
4ECheck the SSB log, and then
call HP technical support.
An internal error occurred.88876505
4ECheck the SSB log, and then
call HP technical support.
An internal error occurred.88886505
4ERefresh the window, and
retry the operation. If nothing
The specified port is not
equipped.
88896505
changes, call HP technical
support.
4EWait until the initialization of
the port ends, and retry the
operation.
The specified port is being
initialized.
88906505
4EDelete the logical paths on
the port and retry the
operation.
Logical paths exist on the
port.
88916505
Remote Web Console Error Codes 263