HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
groups, if any. Ensure that
there are no data volume
groups or data volume pairs
for remote copy operations.
pairs and journal groups,
and then retry the operation.
4ECheck the SSB log, and then
call HP technical support.
An internal error occurred.87376505
4WCheck the status of the
pinned tracks in the primary
Pinned track(s) exists in the
primary data volume.
87426505
data volume, and clear the
pinned tracks.
4WCheck the status of the
pinned tracks in the
Pinned track(s) exists in the
secondary data volume.
87436505
secondary data volume, and
clear the pinned tracks.
4WCheck whether the primary
data volume is in any of the
following conditions:
The specified primary data
volume cannot be used.
87446505
• Data in the primary data
volume is being copied;
correction copy or drive
copy is in progress.
• The primary data volume
is in correction access
condition.
• The primary data volume
is blocked.
• The primary data volume
is being maintained.
• The access attribute of the
primary data volume is
Read Only.
4iCheck whether the secondary
data volume in the remote
The secondary data volume
is already in use by another
system.
87456505
storage system, which is
connected from hosts or the
SVP, is in any of the
following conditions:
• The secondary data
volume is being used by
Dual Copy.
• The secondary data
volume is being used by
Compatible XRC.
• The secondary data
volume is being used by
PPRC or XP Continuous
Access.
• The secondary data
volume is being used by
Concurrent Copy.
• The access attribute of the
secondary data volume is
Read Only.
260 Remote Web Console for Storage System Messages and Error Codes