HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
impossible to change.
Release the Port Group
setting.
2WLog in again after a while.Processing in progress.
Please wait for a while, and
then retry the operation.
11410003
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
11540003
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
11560003
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
11590003
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
11690003
persists, call HP technical
support.
6ECorrect the settings, and then
retry.
The volume cannot be
configured as a command
11700003
device because the volume
does not have Read/Write
attribute.
6ECorrect the settings, and then
retry.
Failed to set the host because
the number of hosts exceeds
11730003
the maximum that can be set
in a port.
6ECorrect the settings, and then
retry.
The specified host ID is
already registered.
11740003
6ECorrect the settings, and then
retry.
The specified host is already
registered.
11770003
6ECorrect the settings, and then
retry.
An incorrect host name was
specified.
11780003
6ECorrect the settings, and then
retry.
A non-registered host was
specified.
11790003
2EIf this problem persists call HP
technical support.
An error occurred. If this
problem persists, call HP
technical support.
11800003
6WCorrect the specification, and
then retry the operation.
The specified path cannot be
added, because the volume
11810003
is used by an XP Continuous
Access pair.
2EIf this problem persists call HP
technical support.
An error occurred. If this
problem persists, call HP
technical support.
11820003
26 Remote Web Console for Storage System Messages and Error Codes