HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 54 Error Codes — Part Code 6505 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf the problem persists despite
retrying, call HP technical
support.
A file open error has
occurred.
60226505
2EIf the problem persists despite
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
60236505
0WIf the problem persists despite
retrying, call HP technical
support.
Processing in progress.
Please wait for a while, and
then retry the operation.
65026505
5EThere is no error in this
setting. However, there is an
There is no error in this
setting. However, there is an
65376505
error in another setting anderror in another setting and
the setting processing has not
been executed.
the setting processing has not
been executed.
2EIf the error occurs after
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
70606505
2EIf the error occurs after
retrying, call HP technical
support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
71116505
5EIf the error occurs after
retrying, call HP technical
support.
This error code is not
registered.
73106505
3ERetry the operation. If this
problem persists, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
80006505
3EWait a few seconds, and
then retry the operation.
A communication time-out
error occurred in the
80016505
subsystem. Wait for a while,
and then retry the operation.
3EWait a few seconds, and
then retry the operation.
A communication time-out
error occurred in the
80026505
subsystem. Wait for a while,
and then retry the operation.
2ERetry the operation. If this
problem persists, call HP
technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
81006505
3ECheck whether the
DKCMAIN microcode version
This function is not supported.81026505
and the SVP microcode
version are mismatched.
4iRetry the operation.Retry operation.87006505
4iCheck the path status and
edit the path again.
The logical path between the
local and the remote
subsystems is invalid.
87016505
4iRefresh and check the
window. If possible, retry the
The status of the primary data
volume is not valid.
87026505
256 Remote Web Console for Storage System Messages and Error Codes