HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 52 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WTo delete the pair, even
though you cannot re-execute
As a result of this operation,
you will not be able to re-start
ERASE R-VOL operation.
93186010
the R-VOL deletion, click
[OK]. If not, click [Cancel].
0WTry again after the script
ends.
The specified operation is
prohibited while the script is
running.
93246010
0iClick [OK].The script is terminated
forcibly.
93256010
0iClick [Refresh] to update the
history file. If this problem
The monitoring time is over,
but the history file is not fully
updated yet.
93276010
persists, call HP technical
support.
0iClick [OK], and then continue
the operation.
This operation is not applied
yet.
93326010
0iThe requested operation has
started. Click [OK] to close
the dialog.
The requested operation has
started.
93376010
0WCheck the specified values
and retry the operation.
The specified value exceeds
the range. Alternatively, the
93606010
relationship between the
specified values is not
appropriate.
5WSelect Add RCU command,
and then register a DKC
path.
If you plan to create a pair
with the specified LUSE
volumes, a DKC path is
required.
550356010
0WFind the CUs that can be
used by the storage system
specified by the Controller ID.
The subsystem specified by
Controller ID is not available
for the particular CU selected
from the tree.
552026010
0WFind the ports that can be
used by the storage system
There are no initiator ports
that can be used by the
552036010
specified by the Controller ID,subsystem specified by
Controller ID. and set them as initiator
ports.
0WCheck the settings of the
specified RCU, M-VOL and
R-VOL.
The M-VOL or R-VOL is not
supported by the specified
RCU.
552046010
0WRegister the consistency
groups, and then retry the
operation.
There are no consistency
groups available for the CLPR
of the specified volumes.
565376010
Register the consistency
groups and then retry the
operation.
0WCheck the size of the file,
decrease the size and retry
the operation.
The size of the specified file
exceeds 8 megabytes, so the
file cannot be uploaded.
565406010
0WTo cancel the change
operation of the option
Are you sure you want to
cancel the change operation
590016010
parameter, click [OK].
Otherwise, click [Cancel].
of the option parameter that
you specified?
Remote Web Console Error Codes 251