HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 52 Error Codes — Part Code 6010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0WConfirm whether the
command device for Business
There are no valid volumes.93036010
Continuity Manager is
defined.
0WFollow the instructions in the
message.
WARNING: Group or C/T
is specified for Delete Range.
93046010
Confirm all pairs in the group
are synchronized. If some
volumes are not
synchronized, full volume
initialization is required
before re-using them.
0WSet the port to Initiator before
registering RCU.
There are no initiator ports.93056010
0WThere is no XP Continuous
Access license. Set the
license.
The XP Continuous Access
function is not installed in this
controller. You cannot create
pairs.
93066010
0WBecause the same volume
where multiple paths are
You specified the same
volumes more than once. The
93076010
defined was selected, theduplicate occurrences were
excluded. overlapped one was
eliminated. Click [OK] and
continue.
0WBecause there were
overlapped paths in the
You set the same path more
than once. The duplicate
paths are excluded.
93086010
added paths, the overlapped
paths were eliminated. Click
[OK] and continue.
0WBecause all the added paths
overlapped, the operation of
All paths which you set have
already been registered. This
93096010
adding paths cannot beoperation will terminate
executed. Click [OK] and
continue.
because there is no path
which can be added.
0WBecause there were
overlapped SSIDs in the
You set the same SSID more
than once. Duplicate SSIDs
are excluded.
93106010
added SSIDs, the overlapped
SSIDs were eliminated. Click
[OK], and continue.
0WBecause all the added SSIDs
are overlapped, the
All SSIDs which you set have
already been registered. This
93116010
operation of adding SSIDsoperation will terminate
cannot be executed. Click
[OK], and continue.
because there is no SSID
which can be added.
0WFollow the instructions in the
message.
Through this operation,
M-VOL status will be changed
93166010
to Simplex mode even if the
M-VOL is online to the host.
0WFollow the instructions in the
message.
The destination volume of the
specified volume pair may
93176010
contain some inconsistency
because volume copy is not
completed yet. Full volume
initialization is required
before re-using it.
250 Remote Web Console for Storage System Messages and Error Codes