HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 3 Error Codes — Part Code 0003 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
11010003
persists, call HP technical
support.
6EBecause at least one LDEV is
required in the parity group,
Volume initialization
operation cannot include the
11020003
you cannot uninstall
anymore.
last LDEV of RAID striping
group.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
11030003
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
11040003
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
11050003
persists, please call HP
technical support.
2EIf this problem persists, call
HP technical support.
An error occurred. If this
problem persists, please call
HP technical support.
11100003
2EA nickname is not specified
when the configuration
An error occurred. If this
problem persists, call HP
technical support.
11110003
change of LUN Manager is
requested. The error does not
occur normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
6EChange the volumes to create
CV by VLL operation, retry
the VLL setting.
The specified volume is
currently used by Parallel
Access Volume and is not
available for VLL operation.
11130003
2EYou have not specified the
value when registering
An error occurred. If this
problem persists, call HP
technical support.
11160003
WWN. Or zero is set as the
WWN value. The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
6EThe configuration information
has been already changed.
Command device security
cannot be set to the specified
11230003
Check the settings andvolume because the volume
is not a command device. request the setting of the
configuration information
again.
2EThe setting method of
command device/command
The command device setting
and the command device
11240003
device security is incorrect.security setting are incorrect.
Remote Web Console Error Codes 23