HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4ERefresh the window, and
retry. If nothing changes, call
HP technical support.
The specified port is not
equipped.
88896005
4EWait until the initialization of
the port ends, and retry the
operation.
The specified port is being
initialized.
88906005
4EDelete the logical paths on
the specified port and retry
the operation.
Logical paths exist on the
MCU port.
88916005
4WTo continue this operation,
click [Yes]. If not, click [No].
R-VOLs exist on the RCU port.
Are you sure you want to
continue this operation?
88926005
4ECall HP technical support.An internal error occurred.88936005
4EStop the jobs from the host
and retry the operation.
Pending background data
exists on the MCU.
88946005
4EStop the jobs from the host
and retry the operation.
Pending background data
exists on the RCU.
88956005
4ERefresh the window, and
retry. If nothing changes, call
HP technical support.
A parameter error occurred.88966005
4EDelete the LUs defined on the
port and retry the operation.
LUs exist on the port.88976005
4iAdd another path, or delete
all pairs on the RCU. Then
retry the operation.
Pending data exists on the
port.
88986005
4ECall HP technical support.An internal error occurred.88996005
4ECall HP technical support.An error occurred during the
port change.
89006005
4ECall HP technical support.An error occurred during the
port change.
89016005
4ECall HP technical support.An error occurred during the
port change.
89026005
4EThe Remote Console
computer detected an
Unknown Error Code.89036005
unknown error code. Call HP
technical support.
5EIf the extended shared
memory (SM #2) is not
No more space is left in MCU
for differential management.
89046005
installed in MCU, install the
shared memory to MCU
according to the installation
instruction of the extended
shared memory for remote
copy (Shared Memory Size
Configuration dialog box),
and then create a pair.
If SM #2 is installed in MCU,
you cannot create any more
pairs because the number of
pairs has already reached
Remote Web Console Error Codes 229