HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4ECall HP technical support.An internal error occurred.88466005
4ECall HP technical support.An internal error occurred.88476005
4iThe suspend pair (Pairsplit-r)
operation failed. A few
Wait a few minutes and retry
the Suspend Pair (Pairsplit-r)
operation.
88486005
minutes later, refresh the
window, confirm if the
specified volumes are in the
permissible status, and then
retry the operation.
4iThe specified volume is not
part of a XP Continuous
Specified volume is not part
of XP Continuous Access pair
88496005
Access pair. Check the
volume.
(Not in Duplex (PAIR),
Pending (COPY), Suspend
(PSUS) state).
4ECheck the serial number,
SSID, link address and
Invalid RCU serial number,
SSID, Link Address or
Controller ID.
88506005
controller ID of the RCU, and
set the correct value. Then
retry the operation. If the
same error occurs, contact HP
technical support.
4ECheck the R-VOL status.Invalid R-VOL.88516005
4EConfirm the R-VOL status.R-VOL status change failed
after M-VOL status change.
Confirm R-VOL status.
88526005
4iThe operation failed, because
of one of the following
reasons:
Delete Pair (Pairsplit-S)
operation failed because
M-VOL is in Simplex (SMPL)
status.
88546005
• The specified volume is
simplex.
• There is no duplex,
duplex-pending, or
suspend volume in the
group.
Verify the status, and retry the
operation.
4iThe operation failed, because
of one of the following
reasons:
Delete (Pairsplit-S) operation
failed because specified
volume or other volume in the
same group is in status
transition.
88556005
• The status of the specified
volume or another volume
in the same group is
Deleting.
• The status of the specified
volume or another volume
in the same group is
Suspending.
4iThe operation failed, because
the status of the CT Group is
Delete Pair (Pairsplit-S)
operation failed because
88566005
SEQCHK. Retry the operationConsistency Time of CT
with either the volume or the
group option.
Group is not determined by
SEQCHK.
226 Remote Web Console for Storage System Messages and Error Codes