HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
4iCheck the pair status and
retry.
No additional volume pairs
waiting for copy.
88366005
4ECall HP technical support.An internal error occurred.88376005
4iThe specified volume is not
part of a XP Continuous
Specified volume is not part
of a XP Continuous Access
pair.
88386005
Access pair. Check the
volume.
4ECheck the serial number,
SSID, link address and
Invalid RCU serial number,
SSID, Link Address or
Controller ID.
88396005
controller ID of the RCU, and
set the correct value. Then
retry the operation. If the
same error occurs, contact HP
technical support.
4iSuspend mode is not valid for
the R-VOL. Check the volume
and retry.
Suspend(Pairsplit-r) operation
is not valid for R-VOL.
88406005
4ERefresh the window, and
check whether the specified
volume is a R-VOL.
The specified volume is not a
R-VOL.
88416005
4EConfirm the R-VOL status.R-VOL status change failed
after M-VOL status change.
Confirm R-VOL status.
88426005
4iThe operation failed, because
of one of the following
reasons:
Suspend(Pairsplit-r) operation
failed because specified
volume or other volume in the
same group is not in
permissible status.
88436005
• The specified volume is
simplex.
• There is no duplex or
duplex-pending volume in
the group.
• Either the specified volume
or another volume in the
same group is suspended.
Verify the status, and retry the
operation.
4iThe operation failed, because
of one of the following
reasons:
Suspend(Pairsplit-r) operation
failed because specified
volume or other volume in the
same group is in status
transition.
88446005
• The specified volume or
another volume in the
same group is deleting.
• The specified volume or
another volume in the
same group is
suspending.
Wait for the change in status
to be completed, and then
retry the operation.
4iCancel the preset suspension
in the CT group, and then
retry the operation.
Preset Suspension is effective
in the CT Group.
88456005
Remote Web Console Error Codes 225