HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
• The volume is copying
data (correction copy or
drive copy).
• The volume is correction
access condition.
Check the logical device
status of the specified M-VOL.
If the M-VOL is either under
maintenance or copying
data, retry the operation after
the process is completed.
4iSelect another volume.A volume cannot be used as
an R-VOL when:
87456005
• it is used by Compatible
XRC.
• it is used by PPRC or XP
Continuous Access.
• it is used by Concurrent
Copy.
• it is in a reserved
condition.
• it is used by XP
Continuous Access Journal
or Universal Replicator for
Mainframe.
• it is used by
ShadowImage for
Mainframe or Compatible
FlashCopy(R).
4iSee the Installation and Open
Platform sections in the
The device emulation type of
the M-VOL is not supported.
87466005
maintenance manual to
confirm whether the device
emulation type of the M-VOL
is supported by XP
Continuous Access (via serial
interface).
4iThe version of the microcode
on the storage system does
Current microprogram
version does not support the
specified operation.
87476005
not support the specified
function or operation. Call HP
technical support.
4iData migration cannot start
because the volume is online.
Specified M-VOL may be in
use by HOST.
87486005
Vary the path offline, and
retry.
4iCheck if the input number of
R-VOL is correct. If not, enter
Specified R-VOL is still online
from HOST.
87496005
the correct R-VOL number. If
the number is correct, vary
the specified path offline.
4iAdd Pair operation failed.XP Continuous Access is not
supported under the RCU
87516005
216 Remote Web Console for Storage System Messages and Error Codes