HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 50 Error Codes — Part Code 6005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
RCU, and then retry the
operation.
4ECheck the path connections
between the MCU and the
Failure during path creation.87226005
RCU, and then retry the
operation.
4iAdd another path, or delete
all pairs on the RCU. Then
retry the operation.
The Edit Path operation was
rejected because the
specified path is the last path
87236005
of some XP Continuous
Access pairs.
4iThe specified number of
paths is less than the
Specified number of paths is
less than the minimum
87246005
minimum number of pathsspecified on RCU Option
screen. specified on the RCU Option
window.
4iThe version of the microcode
on the storage system does
Current microprogram
version does not support the
specified operation.
87256005
not support the specified
function or operation. Call HP
technical support.
4iAdd the normal paths, and
then set the minimum number
of paths.
The number of minimum
paths exceeds the number of
normal paths.
87276005
4iTake either of the following
actions:
The number of minimum
paths exceeds the number of
normal paths.
87286005
1. Add normal paths, and
then delete the paths.
2. Decrease the number of
minimum paths, and then
delete the paths.
4ECall HP technical support.An internal error occurred.87296005
4iTake either of the following
actions:
Invalid Logical Addresses are
specified.
87306005
1. If you are adding RCUs,
specify the same logical
address.
2. If you are editing paths,
specify the same logical
address as the existing
paths. (See the Edit Path
dialog box.)
4iThe logical addresses of all
existing paths are not the
The existing logical addresses
are not equal.
87316005
same. Delete the RCU, and
then re-add it, using the same
logical address as other
existing paths.
4EThe maximum number of
SSIDs (four) has been
Too many SSIDs (Only Four
SSIDs are allowed).
87326005
entered. Verify that the SSIDs
are valid, delete one or more,
and then retry the operation.
214 Remote Web Console for Storage System Messages and Error Codes