HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 49 Error Codes — Part Code 5310 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WThe control status will change
to Port Control. Click [OK].
The control status will change
to Port Control.
93125310
5WThe control status will change
to WWN Control. Click
[OK].
The control status will change
to WWN Control.
93135310
5WSet up a maximum value to
control.
There is no control, because
the upper value is 0 in all
ports.
93145310
5iTurn on the monitoring switch
to display the monitoring
data in real time.
The monitoring switch is
turned OFF. If you use the
real time option for the first
93155310
time, turn ON the monitoring
switch.
5WContinue the work, when you
may change in the state
where it does not control.
The control status will change
to No Control.
93265310
5NTo clear settings on removed
ports, check the Delete ports
Settings on removed ports still
remain. To clear the settings,
93285310
if CHA is removed check
box, and then click [Apply].
check the Delete ports if CHIP
board is removed check box
and then select the Apply
button.
5WIf you click [OK] on the next
window, the settings on port
To continue initialization,
select OK on the next
93295310
control will be initialized. Towindow. To quit the
quit the operation, click
[Cancel] on the next window.
operation, select Cancel on
the next window.
5WIf you click [OK] on the next
window, the settings on
To continue initialization,
select OK on the next
93305310
WWN control will bewindow. To quit the
initialized. To quit theoperation, select Cancel on
the next window. operation, click [Cancel] on
the next window.
5WCorrect the specified
contents, and request the
The specified WWN is
already in use.
93315310
setting of the configuration
information again.
5IClick [Yes] to change the
control status.
Do you want to change the
control status to Port Control?
93335310
5IClick [Yes] to change the
control status.
Do you want to change the
control status to WWN
Control?
93345310
5iClick [Yes] to change the
control status.
Do you want to change the
control status to No Control?
93355310
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The Performance Control
group extends across multiple
SLPRs. Do you want to
continue?
590005310
5iReduce the number of
monitored WWNs in the
WWN cannot be registered
because the number of
657335310
ports being set as monitoringmonitored WWNs of each
210 Remote Web Console for Storage System Messages and Error Codes