HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)
Table 46 Error Codes — Part Code 5210 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WRestore the pool associated
with the target volume, and
then retry the operation.
This migration plan cannot
be executed, because the
pool associated to the target
volume is blocked.
668005210
5WIncrease the capacity if the
pool is associated with the
This migration plan cannot
be executed because the
668015210
target volume, and then retry
the operation.
usage rate of the pool
associated to the target
volume may be 100 percent
or more.
5WIncrease the capacity if the
pool associated with the
The usage rate of the pool of
target volume may exceed
690565210
target volume, and then retry
the operation.
the threshold. Do you want to
continue?
5WIncrease the size of the pool
associated with the target
volume.
The usage rate of the pool of
target volume may exceed
the threshold of pool. Do you
690655210
want to continue this
operation?
Table 47 Error Codes — Part Code 5305
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECorrect the specified
contents, and request the
The specified WWN is
already being used.
10645305
setting of the configuration
information again.
6ERetry the same operation. If
nothing changes, call HP
technical support.
This port is not properly
equipped.
12585305
2EFailed to connect the
communication between
An error occurred during SVP
processing. If this problem
20025305
DKCs (SVPs). If the errorpersists, call HP technical
support. occurs after retrying, call HP
technical support.
3ERetry the same operation. If
the error occurs after retrying,
call HP technical support.
A connection error has
occurred.
20155305
3WWait a few seconds, and
click [Refresh].
The SVP is now updating the
statistics data. Wait for a
20335305
while, and then select the
[Refresh] button.
3ERetry the same operation. If
the error occurs after retrying,
call HP technical support.
A connection error has
occurred.
21455305
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
30035305
persists, call HP technical
support.
2ECorrect the specified content,
and retry.
The WWN should be input
with hex digits (0-9 and A-F)
and 16 characters.
50005305
Remote Web Console Error Codes 203