HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 45 Error Codes — Part Code 5205 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0ECheck the volume, or quit
using XP Continuous Access.
An internal logic error
occurred.
85295205
0ECheck the volume, or quit
using XP Continuous Access.
An internal logic error
occurred.
85305205
0ECheck the volume, or quit
using XP Continuous Access.
An internal logic error
occurred.
85315205
6ESpecify the volumes with the
same size for the source and
The sizes of the source and
the target volumes are not
equal.
86715205
the target of migration, and
then retry the operation.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
89715205
persists, call HP technical
support.
6ESpecify the other volumes.The specified volumes cannot
be used for migration,
550595205
because the specified source
volume is a XP Continuous
Access volume, a TrueCopy
for Mainframe volume, or an
XP External Storage Access
Manager volume, and the
specified target volume is an
external volume.
6WConfirm the settings of the
specified volumes.
The specified volume
migration plan cannot be
550605205
executed because a volume
on which VMA of Data
Retention is set is paired with
a volume on which VMA is
not set.
6ECheck the setting of the
migration source volume and
the migration target volume.
If the migration source
volume is a normal volume,
a CVS volume of the same
552015205
capacity as the migration
source volume cannot be
specified as the migration
target volume. If the
migration source volume is a
CVS volume, a normal
volume of the same capacity
as the migration source
volume cannot be specified
as the migration target
volume.
5ESpecify the parameters other
than None in Sampling Term.
The auto migration plans
cannot be created because
552075205
None is specified in
Sampling Term.
6ESelect a volume that has the
same owner ID.
The owner ID of the storage
system used by the user does
552235205
not match the owner ID of the
specified target volume.
6ESelect a volume that has the
same owner ID.
The owner ID of the storage
system used by the user does
552245205
Remote Web Console Error Codes 195