HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 43 Error Codes — Part Code 5105 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ECorrect the settings, and then
retry the operation.
The resources of other SLPR(s)
cannot be accessed.
565265105
5WChange the gathering
interval, and retry the
operation.
A monitoring switch cannot
be enabled with the specified
gathering interval.
660165105
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
660175105
persists, please call HP
Technical support.
Table 44 Error Codes — Part Code 5110
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5iTo continue processing, click
[OK]. Otherwise, click
[Cancel].
The monitoring data saved at
present will be deleted.
590305110
The monitoring data currently
saved will be deleted when
you change the setting of the
monitoring switch. If
necessary, use the Export
Tool to save the monitoring
data.
5iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The monitoring data saved at
present will be deleted when
the monitoring switch is set to
Enable the next time.
590315110
The monitoring data currently
saved will be deleted when
you change the setting of the
monitoring switch. If
necessary, use the Export
Tool to save the monitoring
data.
0iSpecify the mounted CUs as
the target to be monitored
The CUs to be monitored are
not specified. If you continue
690325110
when you display thethe operation, hyphens (-) are
performance statistics of the
volumes.
displayed in place of
performance statistics. Do
you want to continue the
operation?
Remote Web Console Error Codes 183