HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 40 Error Codes — Part Code 4005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
the configuration operation.
Or check the status of the
disk storage system to find
whether the storage system is
blocked or not. If the problem
persists, call HP technical
support.
2ECall HP technical support.Currently running microcode
version does not support the
specified operation.
585144005
6WWait a few seconds, and
then retry the operation.
A maintenance operation is
in progress. For example:
587094005
• LDEV formatting is in
progress
• Correction Copy is in
progress
• Drive Copy is in progress
• The CHA/DKA status is
changing
• The cache status is
changing
• Replacement of an OEM
drive microprogram is in
progress
• LDEV shredding is in
progress
• Extent shredding is in
progress
Therefore the specified
operation cannot be
executed.
Table 41 Error Codes — Part Code 4010
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iCorrect the specified content,
and issue the request again.
Part of the range is already
in use.
10304010
0iCorrect the specified content,
and issue the request again.
The specified value is outside
the valid range.
10324010
6EWait a few seconds, click
[Refresh], and change the
Prestaging not completed.20804010
same configuration again. Or
if the DKC status is not
blocked, check the DKC
status. If the same error
occurs, call HP technical
support.
5WCorrect the values specified
as the starting and ending
The value specified as the
ending address for the data
50104010
addresses, and then retry the
operation.
to be placed in cache is
smaller than the value
specified as the starting
address.
Remote Web Console Error Codes 177