HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 40 Error Codes — Part Code 4005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
555364005
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
555374005
persists, call HP technical
support.
2EDisable the IO Suppression
mode of this volume, and
Cache Residency cannot be
set to the specified volume
555384005
then retry the operation, orbecause the IO Suppression
mode is set to Enable. remove the volume from the
volumes to be set.
2EEnable the Cache mode of
this volume, and then retry
Cache Residency cannot be
set for this volume because
555394005
the operation, or remove theits Cache mode is set to
Disable. volume from the volumes to
be set.
6EInstall the required program
product. When an SLPR is
The specified function is not
available because it requires
Cache Residency Manager.
555404005
allocated, install a necessary
program product for the
SLPR.
6EInstall the required program
product.
The specified function is not
available because it requires
555414005
Cache Residency Manager
for Mainframe.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
555424005
persists, call HP technical
support.
3ECheck the setting.An LDEV number that does
not apply to the selected CU
group has been specified.
555764005
6ECorrect the settings, and then
retry the operation.
The resources of other SLPR(s)
cannot be accessed.
565264005
6WSet the prestaging area by
using Cache Residency to use
the prestaging function.
The prestaging is not
executed because the
prestaging area does not
565424005
exist. Check the Cache
Residency setting.
6EWait a few seconds, and
then retry the operation.
The current Cache Residency
setting cannot be changed
585114005
because the sidefile size
exceeds the threshold.
6WWait a few seconds, and
then retry the operation.
The current Cache Residency
setting cannot be changed
585124005
because the prestaging
operation is in progress.
Please wait for a while, and
then retry the operation.
6EWait a few seconds, refresh
the window, and then retry
Prestaging not completed.585134005
176 Remote Web Console for Storage System Messages and Error Codes