HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 39 Error Codes — Part Code 3305 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
then change the size of
volume.
2EThere is no capacity left in
the logical parity group to
The free space remaining in
the parity group is not
10373305
create CV. The error does notenough to install a
customized volume (CV). occur normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
2EThe specified emulation type
of CV cannot coexist. The
The specified emulation type
of the customized volume
10383305
error does not occur normally(CV) is a type that cannot be
combined. because it is guarded in the
screen. In the unlikely event
that this error occurs, contact
HP technical support.
2ECheck the setting.A path is defined to the
specified volume.
10393305
6ECheck and correct the
settings. If Volume Initialize
The CU number and the
LDEV number set in the VLL
10413305
and Make Volume areoperation are the same as
those of other volumes. specified at the same time,
operate them separately.
2ECorrect the settings, and then
retry the operation.
An operation is specified for
the uninstalled VDEV.
10433305
2EIf this problem persists, call
HP technical support.
An error occurred during
SVP processing. If this
10443305
problem persists, call HP
technical support.
6ECorrect the specified content,
and issue the request again.
The specified Subsystem ID
already exists. Specify
another SSID.
10453305
2EIf this problem persists, call
HP technical support.
An error occurred during
SVP processing. If this
10493305
problem persists, call HP
technical support.
2ECorrect the settings.The specified CU number
cannot be set.
10743305
2ESpecify one or more than one
operations of Install CV,
In the VLL operation (Install
CV, Make Volume, Volume
10753305
Make Volume, VolumeInitialize and Volume to
Initialize, and Volume toSpace), there are some
Space in the VLL operation.operations which cannot be
Note that the operations ofset together are specified.
Make Volume and VolumeThe operations that can be
Initialize can only be set
together.
set together at a time are
Make Volume and Volume
Initialize only.
2ECorrect the settings, and then
retry the operation.
An operation is specified for
the uninstalled volume.
11013305
6EBecause at least one LDEV is
required in the parity group,
Volume initialization
operation cannot include the
11023305
164 Remote Web Console for Storage System Messages and Error Codes