HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 38 Error Codes — Part Code 3210 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
OPEN-0V will change to
OPEN-V.
Execute the operation by
selecting the following
modes.
(The temporary setting will be
discarded.)
[Normal] executes the
operation only to the TP-VOLs
where paths are not set.
[Force] executes the
operation to all TP-VOLs.
Confirm that the operation
does not affect the host
before executing the
operation.
5WTo continue processing, click
[Normal] or [Force]. To stop
processing, click [Cancel].
The emulation type of an XP
Thin Provisioning volume
(TP-VOL) that is set to OPEN-V
will change to OPEN-0V.
690583210
Execute the operation by
selecting the following
modes.
(The temporary setting will be
discarded.)
[Normal] executes the
operation only to the TP-VOLs
where paths are not set.
[Force] executes the
operation to all TP-VOLs.
Confirm that the operation
does not affect the host
before executing the
operation.
5WTo continue processing, click
[OK]. To stop processing,
click [Cancel].
Are you sure you want to
discard zero data?
690773210
5WTo continue processing, click
[OK]. To stop processing,
click [Cancel].
Are you sure you want to
cancel the zero data
discarding operation?
690783210
Table 39 Error Codes — Part Code 3305
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EIf this problem persists, call
HP technical support.
The SSIDs are not defined. If
this problem persists, call HP
technical support.
10353305
2EThe size of volume that can
be set differs by the type of
emulation.
The size of the specified
volume is outside the setting
range.
10363305
Check the setting range of
each emulation type, and
Remote Web Console Error Codes 163