HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 38 Error Codes — Part Code 3210
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the specified content,
and retry the operation.
The specified V-VOL group
cannot be deleted.
550013210
A V-VOL group cannot be
deleted when it contains the
following volumes:
• A volume with path
definition.
• A LUSE volume.
5WCheck the setting range, and
then retry the operation.
The maximum number of
V-VOL Groups is already
registered.
550023210
5WCheck the settings, and retry
the operation.
The setting of V-VOL group is
incorrect.
551013210
5WCheck the content of the
operation.
The V-VOL Group is
duplicated.
551023210
5WCheck the specified content,
and retry the operation.
V-VOL cannot be configured
because the specified value
is invalid.
552013210
It cannot be configured when
one of the following errors
occur:
• The setting capacity of the
V-VOL is outside the
range.
• The number of created
V-VOLs is outside the
range.
• The number of V-VOLs
exceeds the maximum
number of V-VOLs that can
be created in the whole
subsystem.
• The specified capacity
exceeds the remaining
capacity.
5WCheck the settings, and retry
the operation.
There are V-VOLs whose
CU:LDEV numbers are not
set.
553013210
5WCheck the specified content,
and retry the operation.
The selected CU:LDEV
number has already been
used.
553023210
5WCheck the specified content,
and retry the operation.
The CU:LDEV number is
outside the valid range.
553033210
5WCheck the specified content,
and retry the operation.
The SSID setting is incorrect.554013210
5WCheck the specified content,
and retry the operation.
There are boundaries that do
not have SSID.
554023210
5WCheck the content of the
operation.
The specified SSID is already
in use.
554033210
160 Remote Web Console for Storage System Messages and Error Codes