HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 37 Error Codes — Part Code 3205 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
persists, call HP technical
support.
persists, call HP technical
support.
3EAn error occurred on the
DKC side. If this problem
An error occurred on the
DKC side. If this problem
89693205
persists, call HP technical
support.
persists, call HP technical
support.
3EAn error occurred on the
DKC side. If this problem
An error occurred on the
DKC side. If this problem
89703205
persists, call HP technical
support.
persists, call HP technical
support.
2EReboot the SVP computer,
and retry the operation. If this
Failed to update the
configuration information.
Call HP technical support.
89713205
problem persists, call HP
technical support.
3EAn error occurred on the
DKC side. If this problem
An error occurred on the
DKC side. If this problem
89783205
persists, call HP technical
support.
persists, call HP technical
support.
5ECheck the emulation type. To
change the cache segment
The specified emulation type
is the type that cannot be
565133205
size to set the specifiedadded. To set the specified
emulation type, call HP
technical support.
emulation type, the cache
segment size must be
changed. Call HP technical
support.
5ECheck the capacity of the
volume.
The capacity of the specified
volume is less than the
565143205
minimum required to perform
the Add LU operation.
5EReset the configuration
definition of XP Continuous
The configuration of XP
Continuous Access is defined.
565163205
Access, and then retry the
operation.
Reset the configuration
definition of XP Continuous
Access, and then retry the
operation.
5ERelease the setting of XP
Business Copy,
The Business Copy,
ShadowImage for
565173205
ShadowImage forMainframe, Compatible
Mainframe, FlashCopyFlashCopy(R), or XP Snapshot
Mirroring, or XP Snapshot,
and then retry the operation.
setting exists. Release the
setting and then retry the
operation.
5ERelease the reserve volume
setting of XP Business Copy,
The reserve volume setting of
Business Copy,
565193205
ShadowImage forShadowImage for
Mainframe, FlashCopyMainframe, Compatible
Mirroring, or XP Snapshot,
and then retry the operation.
FlashCopy(R), or XP Snapshot
exists. Release the reserve
volume setting and then retry
the operation.
5ERelease the reserved volume
setting of XP Auto LUN, and
then retry the operation.
The reserved volume setting
of Auto LUN is defined.
Release the reserved volume
565203205
setting of Auto LUN, and then
retry the operation.
158 Remote Web Console for Storage System Messages and Error Codes