HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 35 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WTo continue processing, click
[OK]. To stop processing,
click [Cancel].
If the unit of display is
changed, the status of the
setting will return to the status
690293010
set before. Do you want to
continue?
5WTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The information that is under
setup is not applied to the
device yet. The information
690303010
under setup will be cleared
before the Format processing.
Do you want to continue?
5WTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The volume in the Parity
Group set in the following
window is to be processed.
Do you want to continue?
690313010
5iTo continue processing, click
OK. To stop processing, click
Cancel.
System Disk becomes an
inaccessible volume from the
host because of the area used
690453010
in the disk subsystem. Do you
want to continue?
0iClick [OK] to execute Quick
Format. Click [No] to execute
format.
Do you want to format logical
devices with Quick Format?
690613010
0iThe progress of the specified
process is displayed when
[OK] is clicked.
The following processes are
currently operating. Select the
process that you wish to
display the progress for.
690623010
0iClick [Yes] to set quick format
temporarily. Click [No] to
return to the main window.
Are you sure you want to
execute Quick Format to the
specified volume? (All the
690633010
LDEVs included in the volume
will be quick formatted if the
top LDEV is selected).
0iClick [OK].Preparing for Quick Format
has completed.
690643010
0iClick [OK] to clear the
information being set, and
The information being set is
not applied to the device. The
690693010
the encryption list will beinformation will be cleared
displayed. Click [Cancel] to
return to the main window.
when the encryption list is
displayed. Do you want to
continue?
0iWhen you have clicked [OK]
button, set the blue colored
The blue colored setting items
are cleared, and the contents
690833010
items again, and apply them
to the storage system.
only set in the system disk
options dialog are applied to
the storage system.
When you have clicked
[Cancel] button, apply theDo you want to continue this
operation? blue colored setting items to
the disk array, and then
display the system disk
options dialog to set the items
in the dialog again.
152 Remote Web Console for Storage System Messages and Error Codes