HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 35 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
You can only set another %s
LDEVs because the number of
LDEVs that can be set in a
VDEV is more than the
number of LDEVs that can be
set by Install CV setting one
time.
0WClick [OK].The format processing, the
shredding processing, and
556353010
the prepare for Quick Format
are not executed.
0ERequest HP technical support
to execute the interrupted
The processing for adding or
deleting LDEV remains
556373010
processing and complete it
successfully from the SVP.
interrupted. Call HP technical
support and request to
execute the interrupted
processing and end the
processing normally from the
SVP.
0EConfirm whether the external
volume is zero formatted
An error occurred in format
processing or in Write to
Control Blocks processing.
582093010
when an error occurs in
Write to Control Blocks
processing. Execute zero
format processing when the
external volume is not zero
formatted.
Retry the operation if the
error occurred in the format
processing. If this problem
persists, call HP technical
support.
5WSee the [Shredding Complete
Confirmation] dialog box of
Failed to complete the
shredding processing.
582103010
the HP XP24000/XP20000
Virtual LVI/LUN (VLL) and
Volume Shredder User
Guide.
5iTo change the status, click
[OK]. Otherwise, click
[Cancel].
Are you sure you want to
change the status of the
specified volumes?
590233010
To continue processing, click
[OK]. To stop processing,
click [Cancel].
(If the top LDEV of the LUSE
volume is selected, the status
of all the LDEVs that make up
the LUSE volume will be
changed.)
0iTo format the volume, click
[OK]. Otherwise, click
[Cancel].
The specified volume will be
formatted. Are you sure you
want to continue?
590243010
(To select a LUSE volume,
select the top LDEV.)
5iTo continue Write to Control
Blocks processing, click [OK].
Otherwise, click [Cancel].
Use this function only for zero
formatted volumes. Do you
want to continue this
operation?
591183010
150 Remote Web Console for Storage System Messages and Error Codes