HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 2 Error Codes — Part Code 0002 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
persists, call HP technical
support.
2ECall HP technical support.The server configuration is
invalid. Call HP technical
support.
20110002
2EIf this problem persists call HP
technical support.
An error occurred during SVP
processing. If this problem
20120002
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
20130002
persists, call HP technical
support.
2EIf this problem persists call HP
technical support.
An error occurred. If this
problem persists, call HP
technical support.
20150002
6NRetry after a while.Array is refreshing, or the
settings by the user are
20160002
registered. Retry after a
while.
3ERetry the same operation. If
the error occurs after retrying,
call HP technical support.
A connection error has
occurred.
21450002
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
30030002
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
50100002
persists, call HP technical
support.
6WReduce the number of
requests and retry the
operation.
The number of requests
exceeds the maximum
number that can be
50400002
processed. Reduce the
number of requests and retry
the operation.
2EConnection is terminated
from the server due to the
A sequence error occurred.
Call the developer of the
client program.
51300002
network failure, etc. Log on
again. This error might occur
and remain internally in the
unlock function log when a
user in View mode selects the
Exit button, but this is not a
problem. In other cases, call
HP technical support.
3EWait a few seconds, and
then click [Refresh] on the File
The storage system is in
internal process, or some
55100002
menu, or Wait a few seconds
and login again.
other user is changing the
configuration. Wait a few
seconds, and then click
[Refresh] on the File menu, or
Remote Web Console Error Codes 15