HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 35 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
0iSpecify the SSID.91503010
5iTo continue processing, click
OK. To stop processing, click
Cancel.
The specified volume will be
shredded. Are you sure you
want to continue? (If the top
93703010
LDEV of the LUSE volume is
selected, all the LDEVs that
make up the LUSE volume will
be shredded.)
5iSee the [Shredding Complete
Confirmation] dialog box of
Shredding has completed.93713010
the HP XP24000/XP20000
Virtual LVI/LUN (VLL) and
Volume Shredder User
Guide.
0WClick [OK].The MakeVolume operation
will be performed while the
550263010
number of volumes in the
parity group is zero.
0WClick [OK].There is a volume that has not
been divided into volumes of
the same size. ( - %d [Block])
550303010
0WClick [OK].There is a volume that is
slightly smaller than the user
550313010
size that you specified. ( - %d
[Block])
0WSpecify a smaller size, and
then retry the operation.
You cannot create a volume
of the specified user size due
to insufficient free space.
550323010
0WClick [OK].There is no specifiable LDEV
number. Probable causes and
solutions are:
550333010
• The CU number that can
be specified for the started
SLPR is not assigned.
Contact the storage
administrator.
• All LDEVs in the usable
CU are already used.
• Check whether the LDEVs
are used by another SLPR.
Alternatively, contact the
storage administrator.
0WCheck the settings and retry
the operation.
There are no volumes that
can be initialized.
552053010
5WReduce the number of
V-VOLs, and then retry the
operation.
No more V-VOLs can be set,
because the number of
V-VOLs exceeds the maximum
555883010
number that can be set to the
whole storage system.
5WApply the Install CV setting,
and then retry the Install CV
setting.
Only up to 16,384 LDEVs
can be set when you apply
the Install CV setting once.
555953010
Remote Web Console Error Codes 149