HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 35 Error Codes — Part Code 3010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
• release the JNL settings
from the volume.
• release the quorum disk
settings from the volume.
5WCheck the content of the
operation.
There is no volume to be
initialized.
50553010
A volume cannot be
initialized when it is:
• defined with a path or
paths,
• used as a LUSE volume,
• reserved for Auto LUN,
• paired with another
volume,
• set as a command device,
• used for Volume Security,
• not read/write-enabled,
• used as a Pool volume,
• used as a JNL volume,
• used as a remote
command device volume,
or
• used as a quorum disk.
5WCheck the content of the
operation.
Select LDEVs after canceling
the automatically selected
LDEVs.
50563010
5WCheck the content of the
operation.
There are not enough LDEVs.50573010
5WReduce the number of
volumes in the parity group,
and then retry.
Volume Initialize cannot be
performed because the
number of volumes that can
50583010
be created in the parity
group is exceeded.
5WEnter the correct value.The setting capacity in the VLL
operation is outside the
50603010
setting range. Set the
capacity within the specified
range.
5WEnter the correct value.Set the number of cylinders
used for VLL operation to 50
cylinders or more.
50613010
5WEnter the correct value.LDEV Creation failed because
the specified capacity was
invalid.
50623010
5WDo not contain LUSE at the
time of more than one choice.
The LDEV capacity is not
specified.
50633010
5WSpecify LDEV capacity
correctly.
LDEV capacity is not
specified.
50643010
Remote Web Console Error Codes 147