HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 35 Error Codes — Part Code 3010
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WReduce the number of Cache
Residency Manager settings,
and then retry the operation.
The number of Cache
Residency Manager settings
has exceeded the maximum
10463010
number of available Cache
Residency Manager areas.
5WCorrect the specified content,
and retry.
The specified SSID falls out
of range. Specify a valid
50103010
SSID, and then retry the
operation.
5WCorrect the specified content,
and retry.
Specify a value that is one
cylinder or more.
50113010
5WCorrect the set value, and
then retry the operation.
Set a value that is 35MB
(72,000 blocks) or more.
50123010
5WCorrect the specified content,
and retry.
There are no LDEVs which
can be initialized. Specify
50303010
LDEVs which are not Auto
LUN reserved volumes.
5WCorrect the specified content,
and retry.
No LDEV is specified.50313010
5WThe specified value exceeds
the maximum.
50403010
5WCheck the content of the
operation.
Failed to perform the Volume
to Space operation because
50503010
the specified LDEV is the last
LDEV in the VDEV.
5WCheck the content of the
operation.
Free space is required for
Install CV to operate.
50513010
5WCheck the content of the
operation.
The specified LDEV is already
in use.
50523010
5WCheck the content of the
operation.
The specified SSID is already
in use.
50533010
5WCheck the content of the
operation.
Execute any of the
corresponding items below
before deleting LDEV:
50543010
However, LDEV cannot be
deleted when it is a remote
command device.
• delete the paths
associated with the LDEV.
• release the LUSE volume.
• release the reserved
volume of Auto LUN.
• remove the Volume
Security settings from the
volume.
• set the access attribute of
the LDEV to read/write.
• release the Pool settings
from the volume.
146 Remote Web Console for Storage System Messages and Error Codes