HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 34 Error Codes — Part Code 3005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ERelease the paths, and then
retry the operation.
The association cannot be
released because paths are
defined to the target volumes.
656773005
6ERelease the LUSE setting, and
then retry the operation.
The association cannot be
released because a LUSE
656783005
setting is made on the target
volumes.
6EMake sure that the volumes
are not reserved for XP Auto
The association cannot be
released because the target
656793005
LUN, and then retry the
operation.
volumes are reserved for Auto
LUN.
6WAssociate or release LDEVs in
the V-VOL groups.
The operation failed because
some V-VOL groups cannot
be associated or released.
656803005
2ECancel the format processing
from the SVP, and then retry
A failure occurred while
formatting.
656883005
the formatting processing
again.
2ECancel the quick formatting
processing from the SVP, and
A failure occurred while
quick formatting.
656893005
then execute the quick
formatting processing again.
6ECheck the settings and retry
the operation.
The specified volumes contain
volumes that are being quick
656903005
formatted. Check the settings
and retry the operation.
6ECheck the status and wait
until the status changes to a
Preparing for quick format.
Check the status and wait
656913005
state that allows
maintenance.
until the status changes to a
status that maintenance is
possible.
6ESelect only the volumes that
quick format can be executed
and execute quick format.
The specified volumes contain
volumes that quick format
cannot be executed. Select
656923005
only the volumes that quick
format can be executed and
execute quick format.
6EAdd the System Disk, or
restore the blocked System
Quick format cannot be
executed. There is no System
656933005
Disk, and then retry Quick
Format.
Disk area for Quick Format,
the capacity of the System
Disk is insufficient or the
System Disk is blocked.
6EChange the setting or execute
the quick formatting process
Quick format cannot be
executed because the number
656943005
after the other parity groupsof parity groups being quick
have completed the quick
formatting process.
formatted has exceeded the
maximum. Change the setting
or execute the quick
formatting process after the
quick format processing for
other parity groups has
completed.
Remote Web Console Error Codes 141