HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 34 Error Codes — Part Code 3005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
and the SVP microcode
version are mismatched.
6EIf this problem persists, call
HP technical support.
An error occurred while
connecting to the subsystem.
585743005
Wait for a while, and then
retry the operation.
6EIf this problem persists, call
HP technical support.
An error occurred while
connecting to the subsystem.
585753005
Wait for a while, and then
retry the operation.
3EIf this problem persists, call
HP technical support.
A communication time-out
error occurred in the storage
585763005
system. Wait for a while, and
then retry the operation.
6EResynchronize the pair or
release the pair definition,
and then retry the operation.
The specified operation
cannot be performed,
because the XP Snapshot pair
586233005
using the pool volumes to be
maintained is in PSUS status
or being restored. Please
resynchronize the pair or
release the pair definition,
and then retry the operation.
6ECancel the pair definition,
and then retry the operation.
An XP Snapshot pair is
defined. Cancel the pair
586263005
definition, and then retry the
operation.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing.
587063005
If this problem persists, call
HP technical support.
6ECheck the setting of the
specified volume.
The specified volume is used
as a System Disk volume.
656503005
6ECheck the setting of the
specified volume.
The specified volume is used
as an XP Thin Provisioning
volume.
656593005
6ERelease the association of the
pool volume and the XP Thin
The pool volumes associated
with the XP Thin Provisioning
656713005
Provisioning volume included
in the items to be maintained.
volume is included in the
items to be maintained.
Release the association of the
pool volume and the XP Thin
Provisioning volume included
in the items to be maintained.
6ECheck the setting and the
status of the LDEV in the
specified parity group.
The LDEV to be operated is
not included in the specified
parity group. Check the
656753005
setting and the status of the
LDEV in the specified parity
group.
6EConfirm that it is associated
with a pool in the same CLPR.
The association cannot be
made because the pool is in
a different CLPR.
656763005
140 Remote Web Console for Storage System Messages and Error Codes