HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 33 Error Codes — Part Code 2010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WFollow the correct operation
procedure.
The specified LDEV is
inaccurate.
50562010
5WClick [OK] to continue the
operation. Click [Cancel] to
stop the operation.
Are you sure you want to
perform the LUSE operation
on a volume that has a path
definition?
58122010
5WSpecify the LUSE displayed
in blue bold italic characters.
There are no LUSE volumes
that can be reset. Check the
specified volumes.
58152010
2ECall HP technical support.An error occurred in the client
logic.
70602010
0iThe specified volumes will be
expanded to LUSE volume.
90102010
All data in each LDEV will be
initialized. Do you want to
continue?
0iThe specified LUSE volume
will be released. All data in
90602010
the volume will be initialized.
Do you want to continue?
0iThe LUSE volume needs at
least one path. Do you want
to continue the operation?
91002010
0iSelect the LUSE.91502010
0iSelect the LUSE volume.91512010
0iWarning: It is required to
assign the LU Path for the
91522010
LUSE volume. Do you want
to continue?
0iSelect the first LDEV of the
LUSE volume.
91532010
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The specified volumes will be
expanded to LUSE volume.
Do you want to continue?
93552010
0iTo continue processing, click
[OK]. To stop processing,
click [Cancel].
The selected LUSE volume will
be reset. Do you want to
continue?
93582010
5WTo continue this operation,
click [OK]. To cancel this
operation, click [Cancel].
Are you sure you want to
perform the LUSE operation
using volumes that have
different CLPR numbers?
550072010
Remote Web Console Error Codes 129