HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 28 Error Codes — Part Code 1110 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCheck the content of the
operation.
The WWN group already
has the same LUN group.
50571110
5WCheck the content of the
operation.
The WWN already has the
same LUN group.
50581110
5WCheck the content of the
operation.
The system cannot add
WWN to LUN group.
50601110
5WCheck the content of the
operation.
The system cannot add
WWN to WWN.
50611110
5WCheck the content of the
operation.
The WWN already exists in
the port.
50621110
5WCheck the content of the
operation.
The WWN already has this
LUN.
50631110
5WCheck the content of the
operation.
The WWN group already
contains this LUN.
50641110
5WCheck the content of the
operation.
This name is already used on
the port.
50651110
5WCheck the operation contents.The corresponding port
cannot be changed because
the security switch is OFF.
50661110
5WCheck the operation contents.The corresponding port
cannot be changed because
the port is an initiator port.
50671110
5WFollow the correct operation
procedure.
You cannot drop the host
onto a host group.
58251110
2ECall HP technical support.An error occurred in the client
logic.
70601110
0iAll the hosts connected to the
target port can access only
90101110
the LUNs defined in group
#00. Therefore, the file
system may become corrupt
while the LUNs defined in all
other groups are
inaccessible. Are you sure
you want to continue this
operation?
0iOnly the host registered in
the group can access the
90111110
LUNs defined to the group. If
the host is not registered in
the group, the host cannot
access any LUN. Are you
sure you want to continue this
operation?
0iThe Security switch of the port
toggled. Do you want to
continue?
90181110
0iThe specified Host Group will
be deleted. Do you want to
continue?
90601110
Remote Web Console Error Codes 117