HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 27 Error Codes — Part Code 1010 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCorrect the settings, and then
retry.
You entered the wrong item.58221010
5WCorrect the settings, and then
retry.
It is not updated.58231010
5WRelease the reserved attribute
of the target volume by using
Data Retention Utility.
The specified volume cannot
be manipulated because it is
reserved by RAID Manager.
58671010
0WCorrect the mode of the
target group.
The host mode is invalid.
Specify a correct host mode.
65091010
2ECall HP technical support.An error occurred in the client
logic.
70601010
0iTo continue processing, click
[OK]. Otherwise, click
[Cancel].
LUN security for the specified
command device will be
released. Do you want to
continue?
90121010
0iThe LUN will be specified as
a command device. Do you
want to continue?
90131010
0iThe LUN will not be specified
as a command device. Do
you want to continue?
90141010
0iTo change the parameter in
High-Speed mode/MIX
The port of a PCB in High
Speed mode/MIX mode is
90151010
mode, click [OK]. Otherwise,
click [Cancel].
selected. When changing the
parameter of topology or the
parameter of host speed, the
change will be applied to the
PCB in High Speed
mode/MIX mode. Are you
sure you want to continue this
operation?
0iTo continue processing, click
[OK]. Otherwise, click
[Cancel].
LUN security will be applied
to the specified command
device. Do you want to
continue?
90171010
0iThe LUN will not be specified
as a command device. Also,
90191010
command device security will
be disabled on the LUN. Do
you want to continue?
0iDo you want to change?91031010
0iSelect the free LUN.91501010
0iOnly the LUN(LDEV) is
specified. Select the
corresponding LDEV(LUN).
91511010
5WCheck the settings.The host mode External
Storage cannot be specified.
552081010
5WCheck the settings.The host mode External
Storage cannot be specified.
552331010
114 Remote Web Console for Storage System Messages and Error Codes