HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
error occurs, call HP technical
support.
6ECheck the settings, and then
retry the operation.
The configuration information
being set does not match the
552061005
current configuration
information. Check the
settings, and then retry the
operation.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
555001005
persists, call HP technical
support.
6ECheck the setting.The specified port is not a
fibre port.
555531005
6ECheck the setting.The specified WWN is not
registered.
555541005
6ECheck the setting.The value of the WWN is not
specified or is set to zero.
555551005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
555611005
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
555661005
persists, call HP technical
support.
6ECheck the setting.The specified Group-ID is
already registered.
555691005
6ECheck the setting.The target cannot be set
because the number of
555711005
targets exceeds the maximum
that can be set in a port.
6ECheck the setting.The setting of the specified
port cannot be changed
555741005
because the attribute of the
specified port is Initiator or
External.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing.
563011005
If this problem persists, call
HP technical support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing.
563021005
If this problem persists, call
HP technical support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing.
563031005
If this problem persists, call
HP technical support.
Remote Web Console Error Codes 111