HP XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, November 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
necessary, re-execute the
setting operation.
6EStop executing I/Os, and
then retry the operation.
The host specified by the
WWN is performing I/O
operations.
20971005
6ECall HP technical support,
when the same problem
persists.
The operation cannot be
performed, because the SVP
microcode version does not
20981005
match the DKCMAIN
(subsystem) microcode
version.
6EWait a few seconds, and
then retry the operation. If the
The operation cannot be
performed, because an
inoperative MP exists.
20991005
same problem persists, call
HP technical support.
2EClick [All Refresh] and refresh
the configuration.
An error occurred while
connecting to the storage
21001005
system. The configuration
may be inconsistent. Select
[All Refresh] and refresh the
configuration.
6ECorrect the settings, and then
retry.
The volume cannot be
configured as a command
25011005
device because the volume
does not have Read/Write
attribute.
6ECorrect the settings, and then
retry.
The LUs cannot be combined
or released because the
25021005
volumes don't have
Read/Write attribute.
6ECorrect the settings, and then
retry.
The LUs cannot be combined
or released because the
25031005
volumes don't have
Read/Write attribute.
5WRelease the reserved attribute
of the target volume by using
Data Retention Utility.
No settings can be made
because of a volume reserved
for RAID Manager.
25041005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
30021005
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
30031005
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
30061005
persists, call HP technical
support.
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
30071005
persists, call HP technical
support.
Remote Web Console Error Codes 109